OSRAM LS
Monsun® 2 LED single luminaire
narrow distribution | LED: 6000lm/7000lm class narrow distribution wide distribution | LED: 5000lm/6000lm/7000lm class wide distribution
narrow or wide distribution | with changeover relay narrow or wide distribution | with self-contained supply
Features

The damp-proof luminaires of the Monsun® 2 LED family were developed for especially challenging environments with high dust, humidity and temperature. The system is sealed for life and has an IP66 protection rating. The robust housing is of glass-fibre reinforced plastic combined with an impact-resistant PC cover (IK08) or a non-yellowing PMMA cover (IK03).
The inherent shape and smooth surfaces prevent dirt deposits.
The optics with longitudinal prisms ensure homogeneous and glare-minimised distribution of light.
Monsun® 2 LED luminaires are suitable for ceiling, wall and suspended mounting. Simple trunking arrangements are possible via single luminaires with integrated through-wiring, or with luminaires for integrating into the Modario® trunking system from Siteco.
Switchable variants, variants with DALI light control and emergency light functionality are available.

Special features
  • damp-proof diffuser luminaire with high-grade materials
  • specifically designed for LED technology with a service live of up to 50,000 hours (L80/B50) or up to 70,000h (L70/B50) each at ta max.
  • closed system (sealed for life, IP66)
  • for use under difficult ambient conditions due to moisture or dust in interior and semi-exterior applications
  • for temperature range -35/-25°C to +40/+45/+50°C according to version (version with switching relay: -15°C to +40°C; version with self-contained supply: luminaire -20°C to +40°C, battery +5°C to +40°C)
  • impact-resistant housing with PC cover (IK08) or with PMMA cover
  • good glare reduction due to longitudinal prisms
  • luminaire with halogen-free wiring
  • reliable Monsun® clip system for rapid installations
  • available with DALI and with self-contained supply
  • integration possible in Modario® trunking systems
  • single luminaire suitable for vertical and horizontal mounting to walls
Housing

Housing of glass-fibre reinforced polyester resin, largely unaffected by aggressive influences; cover of PMMA or impact resistant PC (IK08); housing and cover sealed for life | ceiling/wall fixing and chain suspension of single luminaire of V2A | Modario® insert of sheet steel, pure white (similar to RAL 9010); catch for trunking rail rapid mounting and luminaire installation of V2A | plug connection of polyamide

Electrical

Luminaire with outer plug/socket connection for connecting mains cable at the housing end | plug connection consisting of pre-assembled, in luminaire housing integrated plug and included socket with cable entry for cables D= 7…12mm; version with through-wiring: with second plug connection at opposite luminaire face end
Luminaire with ON/OFF function: with 3-pole plug connection, max. 2.5mm²;
Luminaire with DALI interface: with 5-pole plug connection (3-pole + 2-pole for control signal), max. 2.5mm²;
Versions with changeover relay: for operation via "general mains" or on-site "equivalent power supply": with second plug connection 2-pole for equivalent power supply at opposite luminaire face end; through-wiring not available
Versions with self-contained emergency light element: DALI interface for manual operation (ON/OFF/dimming); additionally with emergency light function according to DIN EN 50172 and DIN EN 60598-2-22 | luminaire for maintained operation: the LEDs for emergency lighting are continuously supplied with power if general lighting or emergency lighting is required (alternating operation on mains supply or on the single battery supply (external battery box) | luminaire with 6-pole plug connection (3-pole for general mains with switched phase + 2-pole for DALI control signal + 1-pole for additional unswitched phase for emergency light element); external battery box with additional, pre-assembled plug connection; through-wiring not available | automatic commissioning function of emergency light unit | with LED for visual self-test functional control of battery in accordance with DIN EN 62034 | reduced luminous flux with battery operation (after 3h battery operation at 25°C: luminous flux > 14%)
UN= 220…240V / AC 50…60Hz/DC

Information for DC operation (220…240V DC):
Luminous flux reduction to approx. 15% with DC voltage operation

Lighting technology

Luminaire with injection-moulded prismatic cover with inner prisms; direct narrow or direct wide light distribution with decent ceiling illumination