Streetlight 10 mini LED
for post-top or side-entry mounting | asymmetric distribution for post-top or side-entry mounting | asymmetric wide distribution with additional light component for rear paths for post-top or side-entry mounting | asymmetric extremely wide distribution, for narrow roads and paths for post-top or side-entry mounting | for pedestrian crossings

Innovative LED technology, embedded into an equally innovative and sustainable luminaire concept – and saving both costs and energy. Typical of the Streetlight 10 LED range.
With the midi, mini and micro construction sizes, all typical applications for technical road lighting can be met efficiently, sustainably and with compliance for the future: the micro version is ideal for illuminating residential streets and areas. The mini version is designed for the standard-compliant illumination of service and collection roads as well as for parking lots and urban spaces. The Streetlight 10 midi LED, equipped with two LED modules, illuminates main roads, collection roads, roundabouts and large squares.
The catenary luminaire versions of the Streetlight 10 LED range are the ideal choice for efficient, high quality traffic route lighting with mounting points directly over the road. The mast version of the Streetlight 10 midi is also approved for security areas, and can therefore be used for illuminating logistics, railway platforms/tracks and other monitored areas.
The modular concept consisting of housing, ECG and LED module makes the luminaire range highly fit for the future. The luminaire unites the technological efficiency and innovation of LED technology with highly precise light control and the outstanding light quality of the Siteco 3-zone faceted reflector. The result: very uniform, glare-free illumination for optimum lighting results and maximum visual comfort, with outstanding luminous efficacy and high efficiency.
The microprocessor-controlled LED operating electronics open up even more potential for efficiency. Luminous flux can be individually set according to needs with the performance packages 'Plus' (with Siteco® Service Box) and 'Premium' (with Street Light Control).
The maintenance concept of the luminaire is also future-fit. Both the optical module and the gear tray can be simply and rapidly replaced. This means upgrading to higher performance, future LED modules is easily implemented.

Special features
  • integrative, future-fit luminaire design
  • newly developed HD reflector technology optimised for the application sector
  • minimised light immission
  • triple-zone reflectors for optimal, homogeneous road lighting
  • adjustable luminaire inclination for optimal adaptation to lighting situations and road geometries
  • optical module unit with high power LEDs for sustainability, future safety and simple maintenance; simply replaceable
  • encapsulated LED module, ready to plug in (IP66)
  • constant luminous flux control ('Plus') for precise, highly efficient road lighting
  • conveniently programmable and parameterisable via the Siteco® Service Box (with Plus version)
  • long system service life and low luminous flux loss via optimised thermal management (up to 100,000 hrs.)
  • low power consumption with very good photometric results ensures efficient and economic road lighting

According to version, the luminaires are equipped with differing functionality ranges for light management and monitoring:
All versions with temperature monitoring for protection of LEDs from thermal overload
Basic performance package:
Luminous flux reduction via 230V control voltage | no luminous flux constancy
Plus performance package with electronic type plate:
Luminous flux constancy over complete service life | Dimming without an external control signal: integrated, factory pre-set and programmable timer for luminous flux reduction in two steps (time value and dimming value for max. operation and both reduction levels is set via the Siteco® Service Box on the mounted or unmounted luminaire) | on request: can be integrated via SDI into existing digital control systems and controlled from a central control point | alternative luminous flux reduction via 230V control voltage
Premium performance package with electronic type plate:
PowerLine-ready with integrated SLC luminaire controller for integration into intelligent, networked light management and monitoring systems (data transmission via standardised LON protocol without supplementary control wires) | further functional range like Plus version

Electronic type plate: special component of Plus and Premium performance packages, saving type information, system-specific configuration and operating/performance data. Automatically configures newly installed LED units or ECGs


Luminaire housing and mast flange of diecast aluminium | high quality, extremely weather-resistant coating in Siteco® metallic grey (DB 702S) | encapsulated LED module with flat, formed optical cover of PMMA; easily replaceable for easy maintenance and suitability for the future | mast flange for post-top or side-entry mounting in 3 sizes for various mast diameters | Luminaire inclination on mast flange settable in steps: (0°/5°/10°/15°) | protection rating: IP66 | insulation class: II


Cover opens downwards | encapsulated, plug-in LED module;
Basic performance package: with 3-pole connection terminal, max. 2.5mm² (2-pole for mains supply + 1-pole for 230V control voltage for power reduction) | control signal: USt= 230V --> 100% luminous flux; USt= 0V --> approx. 50% luminous flux
Plus performance package: with 5-pole connection terminal, max. 2.5mm² (2-pole for mains supply + 1-pole for 230V control voltage for power reduction + 2-pole for Siteco® Digital Interface (SDI)) | SDI for parameterising of luminaire with Siteco® Service Box (with integration of luminaire into digital control system on request) | alternative luminous flux reduction via 230V control voltage
Premium performance package: with 2-pole connection terminal, max. 2.5mm² (control and monitoring of the luminaire from a central control point without supplementary control wires; data transmission according to standardised LON protocol)
Connection for potential equalisation as optional accessory. Required to avoid electrostatic charges when installing to non-conductive masts (wood, concrete, plastic etc.)

Lighting technology

Diverse optic system consists of precisely matched combination of high-performance LED arrays, extremely precise 3-zone faceted reflectors and HD cover.
The high luminance of the LEDs is dispersed and converted by the system to softly distributed light for highly uniform, standard-compliant illumination with flowing contrast transitions and significantly reduced glare.
Enables precisely modified light distribution characteristics for many typical applications:

Rapid advances in LED technology lead to permanent improvements in energy efficiency. This has the consequence that the luminous flux or power consumption may change accordingly. The current values can be found in the photometric report of each product and in the current download files of the lighting planning data.