LUNIS® C For TC Fluorescent Lamps | Extremely Wide Beam
Variant
With Highly Specular Reflector | With Integral Emergency Inverter
Lunis® C Downlight for surface, semi-recessed or suspended mounting | with highly specular reflector, extremely wide beam, CAT 2 with optional louvre*** | with HFG, additionally with integral emergency inverter for 1 hour operation | sheet steel housing, metallic grey (RAL 9006) or pure white (RAL 9010) to choice | reflector and visible reflector flange of highly specular aluminium**
Protection rating: IP23, (IP44 with cover glass** or prismatic disc** and ceiling spacer adapter** | IP54 with cover glass** and ceiling spacer adapter**)
Insulation class: I
*** Constructed for retrofitting optical accessories (cross, ring or turbo louvres) for glare restriction
Please order louvres separately
** The appearance can be varied individually with optical-decorative accessories
(Please order optical-decorative accessories and ceiling spacer adapter separately)
Electrical
Luminaires wired ready for connection, with 4-pole terminal block (3-pole for "normal mains" with switched phase* + single pole for additional unswitched phase* for integral emergency inverter), max 2.5mm² | with HFG as standard, with integral emergency inverter* (for 1 hour emergency operation) and with LED (for optical self-test functioning control of battery**)
Rated voltage = 220 to 240V / AC 50 to 60Hz
* the switched phase (at terminal "L1") and the unswitched phase (at terminal "L2") must have the same phasing | the emergency battery will be charged over the unswitched phase and the luminaire will be informed of the operational condition (normal or emergency):
- unswitched phase operating: ---> normal operation (luminaire operation with mains, normal on/off switching)
- unswitched phase missing: ---> emergency operation (with emergency battery) | luminaire is switched on, even when luminaire was switched off in normal operation
** LED signals:
green LED: battery connected and charged
green blinking LED: battery being charged
red blinking LED: battery not connected or defect
yellow blinking LED: automatic discharge/recharge of battery as self-test
emergency operation with reduced lumen output:
lumen output phi=25% (TC-TEL 26W lamping)
lumen output phi=22% (TC-TEL 32W lamping)
lumen output phi=20% (TC-TEL 42W lamping)
with 2-lamp luminaires: operation with one lamp
permissable ambient temperature for luminaire with integral emergency inverter:
0°C..25°C
|
