LUNIS® C Downlight For Surface or Suspended Mounting | for TC Lamps
Variant
With Highly Specular Reflector | Extremely Wide Beam
Lunis® C Downlight for surface, semi-recessed or suspended mounting | with highly specular reflector, extremely wide beam, CAT 2 with optional louvre** | with HFG, additionally with integral emergency inverter | sheet steel housing, metallic grey (RAL 9006) or pure white (RAL 9010) to choice | reflector and visible reflector flange of highly specular aluminium
Protection rating: IP20, (IP44 with cover glass** or prismatic disc** and ceiling spacer adapter | IP54 with cover glass** and ceiling spacer adapter)
Insulation class: I
** the appearance and lighting technology of the downlights can be varied individually with optical-decorative accessories: - cover | ring prism | panel support and information panel (for downlights with total lamp rating of P_max= 50W per downlight)
- coaxial optic | float glass disc | float glass ring | turbo louvre | cross louvre | ring louvre
Electrical
Luminaires wired ready for connection, with 4-pole terminal block (3-pole for "normal mains" with switched phase* + single pole for additional unswitched phase* for integral emergency inverter), max 2.5mm² | with HFG as standard, with integral emergency inverter* (for 1 hour emergency operation) and with LED (for optical self-test functioning control of battery**)
U= 220..240V / AC 50..60Hz
* the switched phase (at terminal "L1") and the unswitched phase (at terminal "L2") must have the same phasing | the emergency battery will be charged over the unswitched phase and the luminaire will be informed of the operational condition (normal or emergency):
- unswitched phase operating: ---> normal operation (luminaire operation with mains, normal on/off switching)
- unswitched phase missing: ---> emergency operation (with emergency battery) | luminaire is switched on, even when luminaire was switched off in normal operation
** LED signals:
green LED: battery connected and charged
green blinking LED: battery being charged
red blinking LED: battery not connected or defect
yellow blinking LED: automatic discharge/recharge of battery as self-test
emergency operation with reduced lumen output:
lumen output phi=25% (TC-TEL 26W lamping)
lumen output phi=22% (TC-TEL 32W lamping)
lumen output phi=20% (TC-TEL 42W lamping)
with 2-lamp luminaires: operation with one lamp
permissable ambient temperature for luminaire with integral emergency inverter:
0°C..25°C
|
