The Lunis® 2 recessed downlights combine efficient lamp technology, precise optics and consistent, functional design within a single lighting tool that allows highly creative lighting possibilities. The Lunis® 2 family consists of the two construction sizes micro (100mm ceiling cut-out) and mini (162mm ceiling cut-out) and is optimised for LED modules as well as HIT or QT lamps. The outstanding design of the downlight range has been reduced to the minimum, the light effect itself, and the wide spectrum of various reflector technologies are able to solve almost all lighting tasks within a building.
The Lunis® 2 downlights blend completely within their architectural context, with only a slender cover frame with harmonious radius and a continuous shadow gap remaining visible. The reflector can be adapted so that even with an optional IP disc a completely flush and unobtrusive transition between the luminaire and ceiling surface is achieved.

• very simple and extremely quick mounting and dismantling via innovative rapid spring catch system
• optimal integration into the ceiling system via a narrow, flat edge. The reflector is optically separated from the edge by a shadow gap, giving a floating appearance in the ceiling
• perfectly matched highly specular reflector of ultra-pure plated aluminium, for precise light distribution with various beam patterns
• extended guarantee: LED with service life ≥ 50000h -> 5 years | at < 50000h -> 3 years

Modular construction consisting of reflector, mounting ring and separate control gear unit for placing in ceiling cavity | mounting ring with visible fringe of UV-stabilised plastic, white (similar to RAL 9016) | tool-free mounting via Snap In Montage (SIM) spring mechanism | reflector of aluminium, high specular plated | reflector is optically separated from the fringe by a shadow gap and can be aligned in 4 different positions in the mounting ring: protruding, flush with the fringe, lightly recessed or distinctly recessed | supplementary cover panel (IP54) possible with recessed mounting | control gear unit with pre-assembled cable with plug connection to downlight, l=0.5m | all components mounted without tools; the LED module with heat sink can be disassembled without tools (if required)

Luminaire wired ready for connection | separate control gear unit with 3-pole mains terminal (ECG DALI: 3-pole + 2-pole for control signal), max. 2.5mm² |
Control gear unit with pre-assembled cable with plug connection to downlight, l=0.5m

Reflector system of AL99.98% ultra-pure aluminium, highly specular | no light spill to ceiling cavity due to encapsulated reflector system:

• narrow distribution darklight reflector: Office; CAT2(L≤ 1000cd/m²), UGR ≤ 19
• medium distribution darklight reflector: Office; CAT2(L≤ 1000cd/m²), UGR ≤ 19
• medium distribution darklight reflector: LOR (maximum efficiency)
• wallwasher reflector, asymmetric wide distribution