DL® 30 LED

symmetric wide distribution (PL1.2s)



DL® 30 LED, mast luminaire, primary light control with 3 zone facetted reflector, of plastic, silver coated, highly specular, primary optical cover: cover, of PMMA, transparent, structured, light distribution: PL1.2s, light emission: direct distribution, primary light characteristic: symmetric, installation type: post-top, LED, LED High Power, rated luminous flux: 5.530lm, luminous efficacy: 88lm/W, light colour: 830, colour temperature: 3000K, control gear: ECG Basic, control: overheat protection, power reduction, electronic power reduction, mains connection: 220..240V, AC, 50/60Hz, start of lifetime: 63W, end of lifetime: 63W, reduction: 28W, luminaire housing, of diecast aluminium, powder-coated, Siteco® metallic grey (DB 702S), length: 600mm, width: 510mm, height: 290mm, spigot size: d x l = 76 x 100mm (post-top) | with reducer (optional accessory) 60 x 100mm, protection rating (complete): IP66, insulation class (complete): insulation class II (safety insulation), certification: CE, ENEC, VDE, impact resistance: IK08, standard-compliant lighting for roads and squares, packaging unit: 1 piece

Key data
Product type:mast luminaire
Family:DL® 30 LED
Order No.:5XA5132J1A08A5  Produkt in den Merkzettel legen
Lighting technology | Lamps | Control gear
Component 1
Lighting technology:
Light control:3 zone facetted reflector of plastic, silver coated, highly specular
Cover:cover, transparent, structured
Light distribution:PL1.2s
Beam angle:wide distribution
Symmetry:symmetric distribution
Light emission:direct distribution
Lamps:with LED High Power, LED
Rated luminous flux:5530lm
Luminous efficacy:88lm/W
Colour temperature:3000K
Colour rendering index:CRI > 80
Light colour:830
Rated input power begin service life:63
Rated input power end service life:63
Rated input power at 50% lumin. flux:28
Operating device:
Control gear:ECG Basic
Equipment:overheat protection, power reduction
Switching method:electronic power reduction
Material | Colour
luminaire housing:diecast aluminium, powder-coated, Siteco® metallic grey (DB 702S)
Cover:cover of PMMA
Mounting method, mounting location:post-top, on mast
Electrical connection
Nominal voltage:220..240V, AC, 50/60Hz
Surge voltage resistance:6kV 1.2/50µs
Dimensions | Weight
Mast head:spigot size: d x l = 76 x 100mm (post-top) | with reducer (optional accessory) 60 x 100mm
Certificates | Standards
Protection rating:IP66
Insulation class:insulation class II (safety insulation)
Impact resistance:IK08
Supplement:standard-compliant lighting for roads and squares
Certification, designation:CE, ENEC, VDE
Light emission
Light emission:0%
Service life
Rated life:100000h (L80/B10) at AT = 25°C