Skip to main content

Monsun® 2 LED
for mounting to Modario® trunking rail

FEATURES

The damp-proof luminaires of the Monsun® 2 LED family were developed for especially challenging environments with high dust, humidity and temperature. The system is sealed for life and has an IP66 protection rating. The robust housing is of glass-fibre reinforced plastic combined with an impact-resistant PC cover (IK08) or a non-yellowing PMMA cover (IK03).
The inherent shape and smooth surfaces prevent dirt deposits.
The optics with longitudinal prisms ensure homogeneous and glare-minimised distribution of light.
Monsun® 2 LED luminaires are suitable for ceiling, wall and suspended mounting. Single luminaires with through-wiring or integration into Siteco Modario® systems also enables simple trunking.
Versions with ECG and ECG DALI are available.

SPECIAL FEATURES

  • damp-proof diffuser luminaire with high-grade materials
  • specifically designed for LED technology with a lifespan of up to 50,000 hours
  • closed system (sealed for life), IP66
  • for use under difficult ambient conditions due to moisture or dust
  • for temperatures ranges -35/-25°C to +40/+45/+50°C (version with switching relay: -15°C to +40°C); version with self-contained supply: luminaire -20°C to +40°C, battery +5°C to +40°C)
  • impact-resistant housing and PC cover (IK08) or non-yellowing PMMA cover
  • good glare reduction due to longitudinal prisms
  • reliable Monsun® clip system for rapid installations
  • integration possible in Modario® trunking systems

LIGHTING TECHNOLOGY

Luminaire with injection-moulded prismatic cover; direct narrow or direct wide distribution with decent ceiling illumination

ELECTRICAL

Luminaire with outer plug/socket connection for connecting mains cable at the housing end; plug connection consisting of pre-assembled plug and included socket

Luminaire for Modario® trunking rail:
Version without light control: with 3-pole connection system, suitable for 5 or 10-core wired trunking rail | with 3-phase pre-selection via moving of contact pin prior to installation in trunking rail
Version for light control via DALI: with 5-pole connection system (3-pole + 2-pole for control signal), suitable for 10-core wired trunking rail | with 3-phase pre-selection via moving of contact pin prior to installation in trunking rail
Versions for operation on "equivalent power supply" only (luminaire in operation when the on-site "equivalent power supply" is activated; ON/OFF implemented via on-site installation):
Version with ON/OFF function: with 3-pole plug connection to Modario® insert;
Version with DALI interface: with 5-pole plug connection (3-pole + 2-pol for control signal);
Modario® insert suitable for 10-core wired trunking rail | with ECG: equivalent power supply on cores 5 and 7 of rail wiring; with ECG DALI: brightness control*** on cores 5 and 7, equivalent power supply on cores 4 and 6 | phase selection not possible
Versions with changeover relay (for alternating operation via "general mains" or on-site "equivalent power supply" via changeover relay in Modario® insert):
Version with ON/OFF function: with 3-pole plug connection to Modario® insert;
Version with DALI interface: with 5-pole plug connection (3-pole + 2-pol for control signal);
Modario® insert with integrated switching relay suitable for 10-core wired trunking rail | with ON/OFF: equivalent power supply on cores >5< and >7< of trunking rail wiring; with DALI: brightness control on cores >5< and >7<, equivalent power on cores >4< and >6< | with 3-phase pre-selection for mains supply via moving of contact pin prior to installation in trunking rail
General mains: UN= 220…240V / AC 50…60Hz
Equivalent power supply: UN= 220…240V / AC 50…60Hz/DC

Version with self-contained supply (for alternating operation via "general mains" or via integrated self-contained supply):
With 4- or 6-pole contact (3-pole for general mains with switched phase + 1-pole for additional unswitched phase + 2-pole for self-contained supply; with DALI: 4-pole + 2-pole for control signal)

Note on wire assignment in Modario® trunking rail system:
Different wire assignments in Modario® trunking system for DALI luminaires or ON/OFF luminaires; selection of corresponding luminaire mounting insert depends on brightness control of the further luminaires in the Modario® trunking rail system (DALI or ON/OFF)
(see the specific product page for detailed information about all elements)

Information for DC operation (220…240V DC):
Luminous flux reduction to approx. 15% with DC voltage operation (220…240V)

HOUSING

Housing of glass-fibre reinforced polyester resin, largely unaffected by aggressive influences; cover of PMMA or impact resistant PC (IK08); housing and cover sealed for life | ceiling/wall fixing and chain hanger of V2A | Modario® insert of sheet steel, pure white (similar to RAL 9010); catch for trunking rail rapid mounting and luminaire installation of V2A | plug connection of polyamide

FEATURES

The damp-proof luminaires of the Monsun® 2 LED family were developed for especially challenging environments with high dust, humidity and temperature. The system is sealed for life and has an IP66 protection rating. The robust housing is of glass-fibre reinforced plastic combined with an impact-resistant PC cover (IK08) or a non-yellowing PMMA cover (IK03).
The inherent shape and smooth surfaces prevent dirt deposits.
The optics with longitudinal prisms ensure homogeneous and glare-minimised distribution of light.
Monsun® 2 LED luminaires are suitable for ceiling, wall and suspended mounting. Single luminaires with through-wiring or integration into Siteco Modario® systems also enables simple trunking.
Versions with ECG and ECG DALI are available.

SPECIAL FEATURES

  • damp-proof diffuser luminaire with high-grade materials
  • specifically designed for LED technology with a lifespan of up to 50,000 hours
  • closed system (sealed for life), IP66
  • for use under difficult ambient conditions due to moisture or dust
  • for temperatures ranges -35/-25°C to +40/+45/+50°C (version with switching relay: -15°C to +40°C); version with self-contained supply: luminaire -20°C to +40°C, battery +5°C to +40°C)
  • impact-resistant housing and PC cover (IK08) or non-yellowing PMMA cover
  • good glare reduction due to longitudinal prisms
  • reliable Monsun® clip system for rapid installations
  • integration possible in Modario® trunking systems

LIGHTING TECHNOLOGY

Luminaire with injection-moulded prismatic cover; direct narrow or direct wide distribution with decent ceiling illumination

ELECTRICAL

Luminaire with outer plug/socket connection for connecting mains cable at the housing end; plug connection consisting of pre-assembled plug and included socket

Luminaire for Modario® trunking rail:
Version without light control: with 3-pole connection system, suitable for 5 or 10-core wired trunking rail | with 3-phase pre-selection via moving of contact pin prior to installation in trunking rail
Version for light control via DALI: with 5-pole connection system (3-pole + 2-pole for control signal), suitable for 10-core wired trunking rail | with 3-phase pre-selection via moving of contact pin prior to installation in trunking rail
Versions for operation on "equivalent power supply" only (luminaire in operation when the on-site "equivalent power supply" is activated; ON/OFF implemented via on-site installation):
Version with ON/OFF function: with 3-pole plug connection to Modario® insert;
Version with DALI interface: with 5-pole plug connection (3-pole + 2-pol for control signal);
Modario® insert suitable for 10-core wired trunking rail | with ECG: equivalent power supply on cores 5 and 7 of rail wiring; with ECG DALI: brightness control*** on cores 5 and 7, equivalent power supply on cores 4 and 6 | phase selection not possible
Versions with changeover relay (for alternating operation via "general mains" or on-site "equivalent power supply" via changeover relay in Modario® insert):
Version with ON/OFF function: with 3-pole plug connection to Modario® insert;
Version with DALI interface: with 5-pole plug connection (3-pole + 2-pol for control signal);
Modario® insert with integrated switching relay suitable for 10-core wired trunking rail | with ON/OFF: equivalent power supply on cores >5< and >7< of trunking rail wiring; with DALI: brightness control on cores >5< and >7<, equivalent power on cores >4< and >6< | with 3-phase pre-selection for mains supply via moving of contact pin prior to installation in trunking rail
General mains: UN= 220…240V / AC 50…60Hz
Equivalent power supply: UN= 220…240V / AC 50…60Hz/DC

Version with self-contained supply (for alternating operation via "general mains" or via integrated self-contained supply):
With 4- or 6-pole contact (3-pole for general mains with switched phase + 1-pole for additional unswitched phase + 2-pole for self-contained supply; with DALI: 4-pole + 2-pole for control signal)

Note on wire assignment in Modario® trunking rail system:
Different wire assignments in Modario® trunking system for DALI luminaires or ON/OFF luminaires; selection of corresponding luminaire mounting insert depends on brightness control of the further luminaires in the Modario® trunking rail system (DALI or ON/OFF)
(see the specific product page for detailed information about all elements)

Information for DC operation (220…240V DC):
Luminous flux reduction to approx. 15% with DC voltage operation (220…240V)

HOUSING

Housing of glass-fibre reinforced polyester resin, largely unaffected by aggressive influences; cover of PMMA or impact resistant PC (IK08); housing and cover sealed for life | ceiling/wall fixing and chain hanger of V2A | Modario® insert of sheet steel, pure white (similar to RAL 9010); catch for trunking rail rapid mounting and luminaire installation of V2A | plug connection of polyamide