Skip to main content

Monsun® 2 LED
for livestock farming

FEATURES

The damp-proof luminaires of the Monsun® 2 LED family were developed for especially challenging environments with high dust, humidity and temperature ranges. The luminaire with PMMA cover is also ammonia-tolerant, enabling it to be used in livestock production stables and ancillary farming areas.
The Monsun® 2 LED is completely sealed for life and has an IP66 protection rating. The robust housing consists of glass fibre-reinforced plastic and for this application is combined with a non-yellowing PMMA cover (IK03).
The inherent shape and smooth surfaces prevent dirt deposits.
In addition to robustness, efficiency and a long lifespan, the right quality of light is especially important with livestock farming. The optics of the Monsun® 2 LED with longitudinal prisms ensure homogeneous and glare-minimised distribution of light.
Monsun® 2 LED luminaires are suitable for ceiling, wall and suspended mounting.

SPECIAL FEATURES

  • robust housing of glass-fibre reinforced polyester and diffuser of PMMA with tested ammonia tolerance
  • suitable for adverse surroundings (IP66)
  • for temperature range ta= -35…+40°C (ON/OFF) or -25…+40°C (DALI); (ta max. limited to 40°C in ammonia-containing atmospheres in livestock stables)

  • service life up to 50,000h (L80/B50) at ta max.= 40°C
  • high efficiency of up to 162 lm/W
  • variants with three luminous flux levels and two distribution characteristics in each case
  • luminaire with halogen-free wiring
  • reliable Monsun® clip system for rapid installations
  • single luminaire suitable for vertical and horizontal mounting to walls

LIGHTING TECHNOLOGY

Luminaire with injection-moulded prismatic cover with inner prisms; direct narrow or direct wide light distribution with decent ceiling illumination

ELECTRICAL

Luminaire with outer plug/socket connection for connecting mains cable at the housing end | plug connection consisting of pre-assembled, in luminaire housing integrated plug and included socket with cable entry for cables D= 7…12mm; version with through-wiring: with second plug connection at opposite luminaire face end
Luminaire with ON/OFF function: with 3-pole plug connection, max. 2.5mm²;
Luminaire with DALI interface: with 5-pole plug connection (3-pole + 2-pole for control signal), max. 2.5mm²;

Information for DC operation (220…240V DC):
Luminous flux reduction to approx. 15% with DC voltage operation

HOUSING

Housing of glass-fibre reinforced polyester resin, largely unaffected by aggressive influences; cover of PMMA; housing and cover sealed for life | ceiling/wall fixing and chain hanger of V2A | plug connection of polyamide
Luminaire tested for ammonia tolerance; suitable for use in livestock farming stables and ancillary farming areas

APPLICATION AREAS

Suitable for use in stables of livestock farming stables (ammonia tolerance tested)

  • cow sheds
  • pigsties
  • horse stables

Not suitable for use in hen houses due to special light-wave spectrum requirements

FEATURES

The damp-proof luminaires of the Monsun® 2 LED family were developed for especially challenging environments with high dust, humidity and temperature ranges. The luminaire with PMMA cover is also ammonia-tolerant, enabling it to be used in livestock production stables and ancillary farming areas.
The Monsun® 2 LED is completely sealed for life and has an IP66 protection rating. The robust housing consists of glass fibre-reinforced plastic and for this application is combined with a non-yellowing PMMA cover (IK03).
The inherent shape and smooth surfaces prevent dirt deposits.
In addition to robustness, efficiency and a long lifespan, the right quality of light is especially important with livestock farming. The optics of the Monsun® 2 LED with longitudinal prisms ensure homogeneous and glare-minimised distribution of light.
Monsun® 2 LED luminaires are suitable for ceiling, wall and suspended mounting.

SPECIAL FEATURES

  • robust housing of glass-fibre reinforced polyester and diffuser of PMMA with tested ammonia tolerance
  • suitable for adverse surroundings (IP66)
  • for temperature range ta= -35…+40°C (ON/OFF) or -25…+40°C (DALI); (ta max. limited to 40°C in ammonia-containing atmospheres in livestock stables)

  • service life up to 50,000h (L80/B50) at ta max.= 40°C
  • high efficiency of up to 162 lm/W
  • variants with three luminous flux levels and two distribution characteristics in each case
  • luminaire with halogen-free wiring
  • reliable Monsun® clip system for rapid installations
  • single luminaire suitable for vertical and horizontal mounting to walls

LIGHTING TECHNOLOGY

Luminaire with injection-moulded prismatic cover with inner prisms; direct narrow or direct wide light distribution with decent ceiling illumination

ELECTRICAL

Luminaire with outer plug/socket connection for connecting mains cable at the housing end | plug connection consisting of pre-assembled, in luminaire housing integrated plug and included socket with cable entry for cables D= 7…12mm; version with through-wiring: with second plug connection at opposite luminaire face end
Luminaire with ON/OFF function: with 3-pole plug connection, max. 2.5mm²;
Luminaire with DALI interface: with 5-pole plug connection (3-pole + 2-pole for control signal), max. 2.5mm²;

Information for DC operation (220…240V DC):
Luminous flux reduction to approx. 15% with DC voltage operation

HOUSING

Housing of glass-fibre reinforced polyester resin, largely unaffected by aggressive influences; cover of PMMA; housing and cover sealed for life | ceiling/wall fixing and chain hanger of V2A | plug connection of polyamide
Luminaire tested for ammonia tolerance; suitable for use in livestock farming stables and ancillary farming areas

APPLICATION AREAS

Suitable for use in stables of livestock farming stables (ammonia tolerance tested)

  • cow sheds
  • pigsties
  • horse stables

Not suitable for use in hen houses due to special light-wave spectrum requirements