Skip to main content

BELL LED module

FEATURES

A classic, decorative design, simultaneously better light, and with outstanding optics and significantly lower costs. The BELL in the LED variant is the future-fit solution for decorative lighting tasks in outdoor areas.
Two construction sizes, two light colours, several control variants and various covers make it the flexible all-rounder for all applications.
The special BELL LED module is ideally suited for the extending or modernising of existing installations with low effort and simple handling. And without compromises, because concealed in the BELL LED module is the only slightly modified module of the efficient Streetlight 10 road luminaire from Siteco.
Due to Siteco gear tray technology, upgrading to higher performance, future LED modules is easily implemented.

SPECIAL FEATURES

  • LED module including optical cover for especially fast, simple modernisation of existing systems while maintaining the uniform appearance
  • for standardised lighting according to DIN EN 13201, for wide luminaire spacing with uniform illumination of the road
  • LED operating electronics with wide range of functions for efficient control of luminous flux
  • light colours: warm white (3000K) or neutral white (4000K)
  • highly simple mounting and maintenance: modular gear tray concept, can be simply replaced for upgrading versions with conventional lamps to LED or upgrading LED versions to future, more efficient LED generations
  • ideal for the expansion of existing installations - visual appearance of the road is maintained

FUNCTIONS

According to version, the luminaires are equipped with differing functionality ranges for light management and monitoring:
All versions with temperature monitoring for protection of LEDs from thermal overload
Basic performance package:
Luminous flux reduction via 230V control voltage | no luminous flux constancy
Plus performance package with electronic type plate:
Luminous flux constancy over complete service life | Dimming without an external control signal: integrated, factory pre-set and programmable timer for luminous flux reduction in two steps (time value and dimming value for max. operation and both reduction levels is set via the Service Box on the unmounted luminaire) | on request: can be integrated via SDI into existing digital control systems and controlled from a central control point | alternative luminous flux reduction via 230V control voltage

Electronic type plate: special component of Plus performance package, saving type information, system-specific configuration and operating/performance data. Automatically configures newly installed LED units or ECGs

LIGHTING TECHNOLOGY

Precisely matched combination of high-performance LED arrays, optionally with colour temperature 3000K (warm white) or 4000K (neutral white), 3-zone facetted reflectors and clear luminaire cover:

  • asymmetric wide light distribution (ST1.2a); for the ideal, uniform and standard-compliant illumination of wide roads in accordance with EN 13201 | additional reduction of light spill to the rear due to optional shielding on building side

ELECTRICAL

Luminaire opened without tools | LED module and all electric components on removable gear tray
Basic performance package: LED module with 3-pole connection terminal, max. 2.5mm² (2-pole for mains supply + 1-pole for 230V control voltage for power reduction) | control signal: USt= 230V --> 100% luminous flux, USt= 0V --> approx. 50% luminous flux
Plus performance package: LED module with 5-pole connection terminal, max. 2.5mm² (2-pole for mains supply + 1-pole for 230V control voltage for power reduction + 2-pole for Siteco® Digital Interface (SDI))

HOUSING

BELL LED module incl. optical enclosure for upgrading existing luminaires with conventional lamps | PMMA luminaire cover, transparent or stippled, with bayonet catch | insulation class: II | protection rating: identical with the protection rating of the existing luminaire

APPLICATION AREAS

  • squares
  • parks
  • residential streets and collection roads
  • residential areas
  • for large light-point spacing of 30…40m

Rapid advances in LED technology lead to permanent improvements in energy efficiency. This has the consequence that the luminous flux or power consumption may change accordingly. The current values can be found in the photometric report of each product and in the current download files of the lighting planning data.

FEATURES

A classic, decorative design, simultaneously better light, and with outstanding optics and significantly lower costs. The BELL in the LED variant is the future-fit solution for decorative lighting tasks in outdoor areas.
Two construction sizes, two light colours, several control variants and various covers make it the flexible all-rounder for all applications.
The special BELL LED module is ideally suited for the extending or modernising of existing installations with low effort and simple handling. And without compromises, because concealed in the BELL LED module is the only slightly modified module of the efficient Streetlight 10 road luminaire from Siteco.
Due to Siteco gear tray technology, upgrading to higher performance, future LED modules is easily implemented.

SPECIAL FEATURES

  • LED module including optical cover for especially fast, simple modernisation of existing systems while maintaining the uniform appearance
  • for standardised lighting according to DIN EN 13201, for wide luminaire spacing with uniform illumination of the road
  • LED operating electronics with wide range of functions for efficient control of luminous flux
  • light colours: warm white (3000K) or neutral white (4000K)
  • highly simple mounting and maintenance: modular gear tray concept, can be simply replaced for upgrading versions with conventional lamps to LED or upgrading LED versions to future, more efficient LED generations
  • ideal for the expansion of existing installations - visual appearance of the road is maintained

FUNCTIONS

According to version, the luminaires are equipped with differing functionality ranges for light management and monitoring:
All versions with temperature monitoring for protection of LEDs from thermal overload
Basic performance package:
Luminous flux reduction via 230V control voltage | no luminous flux constancy
Plus performance package with electronic type plate:
Luminous flux constancy over complete service life | Dimming without an external control signal: integrated, factory pre-set and programmable timer for luminous flux reduction in two steps (time value and dimming value for max. operation and both reduction levels is set via the Service Box on the unmounted luminaire) | on request: can be integrated via SDI into existing digital control systems and controlled from a central control point | alternative luminous flux reduction via 230V control voltage

Electronic type plate: special component of Plus performance package, saving type information, system-specific configuration and operating/performance data. Automatically configures newly installed LED units or ECGs

LIGHTING TECHNOLOGY

Precisely matched combination of high-performance LED arrays, optionally with colour temperature 3000K (warm white) or 4000K (neutral white), 3-zone facetted reflectors and clear luminaire cover:

  • asymmetric wide light distribution (ST1.2a); for the ideal, uniform and standard-compliant illumination of wide roads in accordance with EN 13201 | additional reduction of light spill to the rear due to optional shielding on building side

ELECTRICAL

Luminaire opened without tools | LED module and all electric components on removable gear tray
Basic performance package: LED module with 3-pole connection terminal, max. 2.5mm² (2-pole for mains supply + 1-pole for 230V control voltage for power reduction) | control signal: USt= 230V --> 100% luminous flux, USt= 0V --> approx. 50% luminous flux
Plus performance package: LED module with 5-pole connection terminal, max. 2.5mm² (2-pole for mains supply + 1-pole for 230V control voltage for power reduction + 2-pole for Siteco® Digital Interface (SDI))

HOUSING

BELL LED module incl. optical enclosure for upgrading existing luminaires with conventional lamps | PMMA luminaire cover, transparent or stippled, with bayonet catch | insulation class: II | protection rating: identical with the protection rating of the existing luminaire

APPLICATION AREAS

  • squares
  • parks
  • residential streets and collection roads
  • residential areas
  • for large light-point spacing of 30…40m

Rapid advances in LED technology lead to permanent improvements in energy efficiency. This has the consequence that the luminous flux or power consumption may change accordingly. The current values can be found in the photometric report of each product and in the current download files of the lighting planning data.