Skip to main content

Streetlight 20 maxi LED

FEATURES

Streetlight 20 LED is the highly practical luminaire range with lens technology for all road lighting applications, ranging from cycle paths to multi-lane carriageways. This is enabled due to four construction sizes with differing lumen levels and various light beam characteristics matched to the application. The discreet, consistent design across all construction sizes achieves harmonious integration into the specific surroundings. Two versions are always available: one with optimised efficiency and one with higher lumen output.

SPECIAL FEATURES

  • four construction sizes for applications in all lighting classes with mounting heights from 3 to 14 metres
  • uniformly integrative luminaire design
  • three light colours for differing design concepts
  • orange-coloured light with amber light colour (1750K) for illuminating conflict zones, designing with light, protecting the environment, lower light pollution and as a replacement for luminaires with sodium vapour lamps (for luminaires with ST0.5a and ST1.0a light distributions)
  • extremely long service life and very efficient continuous operation
  • simple, sustainable module concept for rapid mounting and safe module replacements on the mast (ESD protection)
  • high tightness (IP66) with extremely robust workmanship
  • two control packages for greater flexibility, convenience and efficiency

FUNCTIONS

According to version, the luminaires are equipped with differing functionality ranges for light management and monitoring:
All versions with temperature monitoring for protection of LEDs from thermal overload
Plus performance package
Luminous flux constancy over complete service life | luminous flux reduction via 230V control voltage | dimming without an external control signal: integrated, factory pre-set and programmable timer for luminous flux reduction in two steps (time value and dimming value for max. operation and both reduction levels is set via Siteco® Servicebox directly on the luminaire) | on request: can be integrated via DALI into existing digital control systems and controlled from a central control point |
Configuration via Siteco® Servicebox
Premium performance package
PowerLine-ready with integrated SLC luminaire controller for integration into intelligent, networked light management and monitoring systems (data transmission via standardised LON protocol without supplementary control wires) | further functional spectrum as with the Plus variant, apart from luminous flux reduction via control wire
Premium RF performance package
Radio frequency-ready (RF) via integrated SLC luminaire controller for integration into intelligent, networked light management and monitoring systems (data transmission via standardised wireless protocol without supplementary control wires) | further functional spectrum as with the DALI variant

LIGHTING TECHNOLOGY

Flexible lighting technology via precisely matched LED/lens system with two colour temperatures (3000K, 4000K) and five different light distribution characteristics for maximum efficiency with good quality of light and high visual comfort | supplementary amber light colour (1750K) for luminaires with ST0.5a and ST1.0a light distributions for colour-emphasised conflict zones along roads, for the positive appearance of brick and sandstone facades and as a good alternative for refurbishing existing systems using high and low pressure sodium vapour lamps | optics with transparent cover of toughened safety glass

ELECTRICAL

Luminaire opened without tools, can be folded upwards; LED module and ECP integrated in complete module; ECG can be replaced without ESD protective environment; with connection terminal, max. 2.5mm²
Plus performance package: 3-pole luminaire connection (2-pole for mains supply + 1-pole for 230V control voltage for power reduction) | connection (2-pole, max. 1.5mm² directly to ECG) for configuring the luminaire with Siteco® Servicebox interface component (luminaire also integrated into other digital control systems on request) | alternative luminous flux reduction via 230V control voltage | control signal: USt= 230V --> 100% luminous flux, USt= 0V --> approx. 50% luminous flux
Premium performance package: 2-pole luminaire connection (control and monitoring of the luminaire from a central control point without supplementary control wires; data transmission according to standardised LON protocol)
Premium performance package RF: 2-pole luminaire connection (control and monitoring of the luminaire from a central control point without supplementary control wires; data transmission according to standardised LON protocol)
Connection for potential equalisation as optional accessory. Required to avoid electrostatic charges when installing to non-conductive masts (wood, concrete, plastic etc.)

HOUSING

Two-part luminaire housing consisting of connection compartment with mast flange and complete module | luminaire housing opened without tools | connection compartment, mast flange and complete module of diecast aluminium; IK09 impact resistance | all parts with high quality, extremely weather-resistant coating in Siteco® metallic grey (DB 702S) | LED module captively integrated in the complete module with flat optical enclosure of toughened safety glass (sealed for life) | mast flange for post-top or side-entry mounting in 3 sizes for various mast diameters | luminaire inclination is adjustable in steps (0°/5°/10°/15°), construction size maxi (post top 0°/3°/8°/15°, side-entry -3°/-8°/-15°) | protection rating: IP66 | insulation class: II

APPLICATION AREAS

  • expressways
  • main roads
  • collection roads
  • urban areas, squares
  • crossings, roundabouts
  • outdoor and logistics areas in industry
  • areas with video monitoring; installations with security protection
  • security lighting for industrial facilities
  • airports
  • for luminaire spacing up to 50m

Rapid advances in LED technology lead to permanent improvements in energy efficiency. This has the consequence that the luminous flux or power consumption may change accordingly. The current values can be found in the photometric report of each product and in the current download files of the lighting planning data.

FEATURES

Streetlight 20 LED is the highly practical luminaire range with lens technology for all road lighting applications, ranging from cycle paths to multi-lane carriageways. This is enabled due to four construction sizes with differing lumen levels and various light beam characteristics matched to the application. The discreet, consistent design across all construction sizes achieves harmonious integration into the specific surroundings. Two versions are always available: one with optimised efficiency and one with higher lumen output.

SPECIAL FEATURES

  • four construction sizes for applications in all lighting classes with mounting heights from 3 to 14 metres
  • uniformly integrative luminaire design
  • three light colours for differing design concepts
  • orange-coloured light with amber light colour (1750K) for illuminating conflict zones, designing with light, protecting the environment, lower light pollution and as a replacement for luminaires with sodium vapour lamps (for luminaires with ST0.5a and ST1.0a light distributions)
  • extremely long service life and very efficient continuous operation
  • simple, sustainable module concept for rapid mounting and safe module replacements on the mast (ESD protection)
  • high tightness (IP66) with extremely robust workmanship
  • two control packages for greater flexibility, convenience and efficiency

FUNCTIONS

According to version, the luminaires are equipped with differing functionality ranges for light management and monitoring:
All versions with temperature monitoring for protection of LEDs from thermal overload
Plus performance package
Luminous flux constancy over complete service life | luminous flux reduction via 230V control voltage | dimming without an external control signal: integrated, factory pre-set and programmable timer for luminous flux reduction in two steps (time value and dimming value for max. operation and both reduction levels is set via Siteco® Servicebox directly on the luminaire) | on request: can be integrated via DALI into existing digital control systems and controlled from a central control point |
Configuration via Siteco® Servicebox
Premium performance package
PowerLine-ready with integrated SLC luminaire controller for integration into intelligent, networked light management and monitoring systems (data transmission via standardised LON protocol without supplementary control wires) | further functional spectrum as with the Plus variant, apart from luminous flux reduction via control wire
Premium RF performance package
Radio frequency-ready (RF) via integrated SLC luminaire controller for integration into intelligent, networked light management and monitoring systems (data transmission via standardised wireless protocol without supplementary control wires) | further functional spectrum as with the DALI variant

LIGHTING TECHNOLOGY

Flexible lighting technology via precisely matched LED/lens system with two colour temperatures (3000K, 4000K) and five different light distribution characteristics for maximum efficiency with good quality of light and high visual comfort | supplementary amber light colour (1750K) for luminaires with ST0.5a and ST1.0a light distributions for colour-emphasised conflict zones along roads, for the positive appearance of brick and sandstone facades and as a good alternative for refurbishing existing systems using high and low pressure sodium vapour lamps | optics with transparent cover of toughened safety glass

ELECTRICAL

Luminaire opened without tools, can be folded upwards; LED module and ECP integrated in complete module; ECG can be replaced without ESD protective environment; with connection terminal, max. 2.5mm²
Plus performance package: 3-pole luminaire connection (2-pole for mains supply + 1-pole for 230V control voltage for power reduction) | connection (2-pole, max. 1.5mm² directly to ECG) for configuring the luminaire with Siteco® Servicebox interface component (luminaire also integrated into other digital control systems on request) | alternative luminous flux reduction via 230V control voltage | control signal: USt= 230V --> 100% luminous flux, USt= 0V --> approx. 50% luminous flux
Premium performance package: 2-pole luminaire connection (control and monitoring of the luminaire from a central control point without supplementary control wires; data transmission according to standardised LON protocol)
Premium performance package RF: 2-pole luminaire connection (control and monitoring of the luminaire from a central control point without supplementary control wires; data transmission according to standardised LON protocol)
Connection for potential equalisation as optional accessory. Required to avoid electrostatic charges when installing to non-conductive masts (wood, concrete, plastic etc.)

HOUSING

Two-part luminaire housing consisting of connection compartment with mast flange and complete module | luminaire housing opened without tools | connection compartment, mast flange and complete module of diecast aluminium; IK09 impact resistance | all parts with high quality, extremely weather-resistant coating in Siteco® metallic grey (DB 702S) | LED module captively integrated in the complete module with flat optical enclosure of toughened safety glass (sealed for life) | mast flange for post-top or side-entry mounting in 3 sizes for various mast diameters | luminaire inclination is adjustable in steps (0°/5°/10°/15°), construction size maxi (post top 0°/3°/8°/15°, side-entry -3°/-8°/-15°) | protection rating: IP66 | insulation class: II

APPLICATION AREAS

  • expressways
  • main roads
  • collection roads
  • urban areas, squares
  • crossings, roundabouts
  • outdoor and logistics areas in industry
  • areas with video monitoring; installations with security protection
  • security lighting for industrial facilities
  • airports
  • for luminaire spacing up to 50m

Rapid advances in LED technology lead to permanent improvements in energy efficiency. This has the consequence that the luminous flux or power consumption may change accordingly. The current values can be found in the photometric report of each product and in the current download files of the lighting planning data.